Wednesday, May 12, 2010

Been slacking on posting...and building a car.

So much progress has been made since my last posting in February. I completed my Master's in Veterinary Microbiology in April, and having cleansed myself of that burden I began some pretty serious work. To get this blog up to speed would require some epically long post, so I shall describe my adventures in segments.

In one of the first nice days of this spring, which occurred in early April, I pulled the engine out into the driveway to get some sun and start assembly, and the pics reflect the results of my efforts.

Because of the retardation of this site, and my increasing lack of patience with it, I have significantly scaled back the extent of pictures that I am posting because blogspot makes it impossible to format pics within the text, and then they give you this little tiny window to try to do it all in. At any rate, this zippy little 302 was topped off with an aluminum Weiand Stealth intake, new water pump and timing cover, and polished aluminum Ford Racing valve covers. It's important to remember if you're using roller rockers your valve covers need to be 'tall' in order to have clearance. Since these pics were taken, I also added on the thermostat housing and oil dipstick and tube--both all chrome of course, and stuck the fuel pump back in. The oil pan, fuel pump, harmonic balancer, and engine mounts were the only parts from the 289 that made it on to this build. Everything else is new.
























2 comments:

  1. Josh...did you seal the inside of the fuel tank as well? My coupe's tank is out and rusted. I was thinking of repairing instead of replacing. Tank looks good!

    jeff

    ReplyDelete
  2. I have ended up replacing, just recently in fact. The inside of my tank looked brand new except for one end had some pretty heavy rust and scale. I didn't want to go through the effort to try to clean it and compromise my new build when a new tank is relatively cheap. Besides, my tank had a big dent in the bottom anyways.

    ReplyDelete